Вернуться в раздел
Подкузовные сдвоенные гидроцилиндры A DWR 4-1220-130 - D.150
Cylinder stages
Ø Stages (mm) | Ø045 | Ø060 | Ø076 | Ø092 | Ø108 | Ø069 | Ø088 | Ø107 | Ø126 | Ø145 | Ø165 | Ø167 | Ø187 | Ø210 | Ø236 | Ø265 |
Thrust at 250 Bar [Tons] | --- | 7.10 | 11.3 | 16.60 | 22.90 | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
Stages of cylinder | • | • | • | • |
Specifications
Stages number | 04 |
Cylinder Stroke [ mm ] | 1220 |
Cylinder weight only [ Kgs ] | 38 |
Working volume [ Ltrs ] | 7.0 |
Max Working pressure [ Bar ] | 250 |
Components
Pin Ø36/50x520 – R=310 Fil.M36x3 | PL_36-520 6.30 [ Kgs ] x 1 = |
Nut M36x3 H.40 PF Zn.B. | DDA#F36BB 0.40 [ Kgs ] x 2 = |
Complete cradle x A DWR Double 130 | M02000 49.3 [ Kgs ] x 1 = |
Technical information
Oil : See oil specification sheet | |
Tipping weight : Net weight body + Payload |
Recommendation
This Binotto cylinder is designed as a lifting device only | |
It must not be used as a structural member or be subject to side loads | |
Pump flow in consultation with Binotto engineering department |
Advices
All our cylinders are manufactured to suit the particular application in the differing world markets/climate. Should you require details of the exact lifting capacity of the cylinder that has been selected for your application/vehicle then please contact our technical department who will be only pleased to explain or advise |